Tél : +8618150976625
E-mail : Hello@MicrofiberLeather.com
Synthetic suede for jewelry boxes: crackle-embossed face, 0.4/0.5/0.6 mm, 1370 mm wide, 55 nylon/45 PU, MOQ 300 m. Pick the right grade for your box.
Matériel :
Microfiber Suede (Synthetic Suede), crackle-embossedComposition :
55% Nylon + 45% Polyurethane (PU)Épaisseur :
0.4 / 0.5 / 0.6 mmLargeur :
1370 mm (54 inch)Couleur :
5 stock shades (black, champagne, navy, rose pink, mint); custom colours availableDélai de mise en œuvre :
Confirm against order and specificationCapacité de production :
About 1,000,000 metres per month (multi-product line)This page is for the buyer choosing the lining itself, before the box is cut. The decision is not whether a suede surface protects jewellery; it is which thickness, which grain and which backing will hold up in the way your boxes are opened, closed and shipped.
|
0.4 / 0.5 / 0.6 mmthickness
|
1370 mmroll width
|
55 / 45nylon / PU
|
300 mminimum run
|
|
Check
|
Why it matters
|
|
Wear on the face
|
A box is opened many times. The surface must resist wear without marking the piece inside.
|
|
Backing bond
|
A nonwoven back that folds without fraying keeps a clean edge once glued to board.
|
|
Thickness vs fold
|
Pick the grade by the smallest radius the lid and base panel have to turn.
|
|
Shade consistency
|
Lid, base and wrap panels are cut from one run, so the colour has to hold across the roll.
|
|
Parameter
|
What we supply
|
To confirm with you
|
|
Colour
|
Five stock shades, or matched to your sample
|
physical swatch or Pantone
|
|
Thickness
|
0.4 / 0.5 / 0.6 mm
|
panel type and fold radius
|
|
Width
|
1370 mm (54 inch)
|
cutting layout
|
|
Surface
|
Crackle-embossed, matte
|
grain change by plate
|
|
Composition
|
55% nylon / 45% PU
|
recycled content requirement
|
|
Backing
|
Nonwoven
|
soft turn or firm edge
|
|
MOQ
|
300 linear metres per colour
|
trial order against spec
|
|
Compliance
|
REACH SVHC, Intertek SZHH01505701, material level
|
whether the report goes to your file
|
The face is crackle-embossed rather than raised pile. In packaging trade the word suede is used for the soft, matte hand and the nonwoven structure, not for a long brushed nap — so the surface you see in the photos is the surface you receive. It reads a clear, fine texture under shop light and gives a soft touch when the box is opened.
That matters because a buyer who expects a brushed nap would be surprised by an embossed face. We describe it plainly: a coated film on a nonwoven base, embossed with a fine crackle grain and finished matte. Approve the physical sample and the word becomes irrelevant — the hand and the grain are what your customers will judge.
A soft face does not scratch metal or stone the way a rough board or a hard print can. The embossed grain also hides the small scuffs that appear on a tray that is opened every day, and the breathable backing lets a closed box dry out rather than hold moisture against the contents. For silver, note the limit: a suede face slows contact marks but does not stop tarnish — that job belongs to a treated cloth or barrier.
The five stock colours are laid on the same grain, so a mixed range stays visually related. Read more on our packaging microfiber leather page.
Coating, embossing and winding run on our own lines, and every roll is checked against the approved swatch before packing. We run multiple production facilities in Jinjiang, have supplied synthetic leather for more than 25 years, and ship about one million metres a month across footwear, bags, upholstery, garments and packaging. On compliance we keep the claim narrow: REACH SVHC screening at material level, Intertek report no. SZHH01505701, each listed substance below the 0.1% declaration threshold — covering the submitted material, not a finished box.
What we do not claim: no flame rating for this grade, no grammage, no abrasion cycle figure. If a programme needs one of those, name the method and we will quote testing against it.
Ours is 55% nylon and 45% polyurethane on a nonwoven backing — fully synthetic, with no animal content. The face is crackle-embossed and matte, supplied at 0.4, 0.5 or 0.6 mm.
Yes, for the lining and interior wrap. The soft face avoids marking metal and stone, the grain hides daily scuffs, and it wipes clean. Give the exact piece details if metals are sensitive, so an appropriate lining material can be selected.
No. A suede face reduces surface contact marks but does not stop silver tarnishing. Anti-tarnish depends on a treated cloth or a sulfur-free barrier — ask for that separately if silver is in the box.
Wall thickness is the board maker's call. For the wrap: 0.4 mm on sharp small-radius edges, 0.5 mm for a general range, and 0.6 mm where a large lid needs more body so the face does not dish between supports. Send the smallest fold radius if you are unsure.
Send a physical sample or a Pantone reference. We sample to it and return a swatch for signature; every later roll is checked against that signed swatch.
Tell us the smallest fold radius and how the box will be used. We will reply with the grade and a physical swatch, freight collect.
Request Material SampleÉTIQUETTES CHAUDES :